About us
The company was founded in 1972 by the competent hands of Dalle Stelle Gino, former director of important establishments such as: FEMI, ILVE (formerly ILBE) and ORESTE GALATO.
The experience achieved working there allowed him to open a small laboratory utilized for turning and milling metals, later used in the wine industry.
Ten years later a big change happened, it was precisely on September 21, 1982, when Gino opened up to the industrial market of solvents covering several requests such as distiller lids and gaskets for solvents recyclers.
In 1987, thanks to the success and the growing request of new buyers, he decided to specialise permanently into that sector and the following year the construction of the first industrial plant took place.
A few years later, with his son Andrea, the D.M. DIVISIONE MECCANICA was established (1998).
The company grew year after year on the national territory and later on also international-wise, becoming the reference point.
Growing demand and technological development lead D.M. to create new molds for teflon-loaded viton gaskets at 15% and 18%.
At the same time,constant interventions and investments in computerized machineries were made.
Today , D.M. DIVISIONE MECCANICA, directed by his son Andrea, specializes in the production of special stainless steel accessories for the most important solvent distiller manufacturers and has over 150,000 equipped machineries.
COMPLETE STAINLESS STEEL LID DIAMETER 400 mm
Thickness: 15/10 and/or 20/10
Inox: AISI 304 (AISI 316 on request)
Punctuation Type: Electric Sprouting
Welding Type: TIG
Type of polishing: manual mirror polished stainless steel.
The cover includes arm, screws, tie-rod and gasket in rubber, compatible with 80% of solvents.
The gasket can be ordered in Antacetone rubber or in Viton rubber on request.
COMPLETE STAINLESS STEEL LID DIAMETER 320 mm
Thickness: 15/10
Inox: AISI 304 (AISI 316 on request)
Punctuation Type: Electric Sprouting
Welding Type: TIG
Type of polishing: manual mirror polished stainless steel.
The cover includes arm, screws, tie-rod and gasket in rubber, compatible with 80% of solvents.
The gasket can be ordered in Antacetone rubber or in Viton rubber on request.
COMPLETE STAINLESS STEEL COVER DIAMETER 250 mm
Thickness: 15/10
Inox: AISI 304 (AISI 316 on request)
Punctuation Type: Electric Sprouting
Welding Type: TIG
Type of polishing: manual mirror polished stainless steel.
The cover includes arm, screws, tie-rod and gasket in rubber, compatible with 80% of solvents.
The gasket can be ordered in Antacetone rubber or in Viton rubber on request.
COMPLETE STAINLESS STEEL COVER DIAMETER 200 mm
Thickness: 15/10
Inox AISI 304 (AISI 316 on request)
Punctuation Type: Electric Sprouting
Welding Type: TIG
Type of polishing: manual mirror polished stainless steel.
The cover includes arm, screws, tie-rod and gasket in rubber, compatible with 80% of solvents.
The gasket can be ordered in Antacetone rubber or in Viton rubber on request.
STAINLESS STEEL COVER DIAMETER 320 mm WITH SPLASH RESISTANT BORDER
Thickness 15/10
Inox AISI 304 (AISI 316 on request)
Type of polishing: manual mirror polished stainless steel.
The cover includes arm, screws, tie-rod and gasket in rubber, compatible with 80% of solvents.
GASKETS
Our gaskets can be ordered in the following diameters:
200: 15x16 with standard section
240: 14x14 with special section
250: 16x16 with standard section
320: 14x15 with standard section
330: 18x15 with special section
400: 16x16 with standard section
500: 14x15 with standard section
500: 15x18 with narrow seat section
500: 20x23 with special section
600: 20x20 with standard section
The gasket can be ordered in normal Black, Gray Antacetone rubber, Viton Green rubber and Viton loaded with Teflon at 15% and 18% in blue and dark green on request.
55SH seamless EPDM WHITE rubber gasket sterilizable at 120 ° C for ELECTIC DOORS.
The gasket can be ordered in Gray Antacetone rubber or Viton Green rubber on request.
D.M. Divisione
Meccanica
Top quality since 1972 at best price
About us
The company was founded in 1972 by the competent hands of Dalle Stelle Gino, former director of important establishments such as: FEMI, ILVE (formerly ILBE) and ORESTE GALATO..
The experience achieved working there allowed him to open a small laboratory utilized for turning and milling metals, later used in the wine industry.
Read more
Contacts
- Via Vasco Zanoni 12, Vigodarzere 35010, Padova
- info@dmdivisionemeccanica.com
- Marketing Director and Worldwide Sales Manager:
+393519172587 - 049 702268